Glossary of Terms

Baguette  Small, rectangular shaped diamond often used to enhance the setting of a larger, center stone.

Bar Setting  In this type of diamond setting, a thin bar separates 2 stones.

Bezel Setting  In this type of setting, a rim is used to hold the stones and completely surround it. It often makes the center stone look larger and can protect the girdle of the diamond from being chipped or cracked.

Brilliance  The total amount of light from the interior and exterior surfaces of the diamond. It is the direct result of the cut proportions and polish of the diamond.

Carat  The standardized unit of weight for diamonds. (see carat weight reference).

Certification (Cert)  This diamond quality report is prepared by a Certified Gemologist and describes and grades the diamond's specific cut, color and clarity characteristics as well as stating the carat weight to 2 decimal places. However, it is not a guarantee, valuation or appraisal.

Channel Setting  A number of small stones of uniform size are set into a row or channel with no metal separating them.

Comfort Fit  The shank of the ring is rounded in a dome shape on the inside to maximize comfort and wearability.

Cut  Cut refers not to the shape of the diamond, but to the angles, proportions and faceting arrangements of the stone.

Facets  The angled planes of a cut diamond that direct rays of light into the diamond. The light is then reflected outward creating the diamond’s brilliance.

Fancy Cut  A diamond cut other than round, such as marquise, princess, emerald, trillion, pear, heart or cushion.

Flawless  A diamond with absolutely no internal or external imperfections visible to a professional eye under a 10x power magnification using a binocular microscope.

Fire  The intense rainbow of colors that radiate from a well-cut diamond.

Mounting  The platinum, palladium or gold setting that a gemstone is set into for both security and decorative purposes.

Pave  Diamonds set directly into the metal by lifting a very small amount of metal around the stone to create a prong. This creates a total diamond look across the surface.

Micro Pave  The setting above, actually done under a microscope, since diamonds are so small, the metal and stones must be magnified in order to see them and lift the metal for setting.

Prong Setting  In this type of setting, four to six metal “claws” or fingers grasp onto the diamond and hold it away from the band while keeping it securely in place. This setting allows for the fullest amount of light to enter the diamond so that it can exhibit maximum brilliance and sparkle.

Shank  The part of the ring that wraps around the finger.

Shape  The finished form of a diamond:

  • Round brilliant cut
  • Princess (square)
  • Emerald cut (rectangular)
  • Cushion (square with rounded corners)
  • Pear shaped
  • Oval
  • Marquise (oblong with pointed ends)
  • Trillion
  • Heart

Solitaire  The mounting of a single (solitary) diamond, any shape.

Table  The large facet on the top of the diamond's crown.

 

What is Tycoon Cut?

The Tycoon Cut is a design of a diamond that was created in 1999 by thetwo Toros Kejejian cousins.The design holds four international patents.

The Tycoon Cut is a simple design with 9 crown facets and 20 step-cut pavilion facets. The cut has has a signature diamond shaped table that has earned the trademark slogan: “THE ONLY DIAMOND WITH A DIAMOND ON TOP”.

The first rule in design is “Less is More” and that is the magic of the Tycoon Cut: It is a very simple design.

There are many cuts available today on the market. Unlike some other cuts, the uniqueness of the Tycoon Cut is that it's visible to the naked eye.

The Tycoon Cut design adds more fire and brilliance to the diamond. The step-cut pavilion design allows the color to show higher then actuality. The 9 crown facets design hides inclusions better then the traditional square table.

The Tycoon Cut diamond is available in the following shapes: Rectangular, Tapered, Square, Trapezoid, and Cut-corner. It is also available in a variety of gem stones: Blue Sapphire, Pink Sapphire, Yellow Sapphire, Ruby and Emerald and Tanzanite.

Every Tycoon Cut diamond, 0.50 carat or larger, is serial numbered, GIA graded, and laser inscribed to ensure authenticity of the Tycoon Cut diamond.

GIA was quick to recognize Tycoon Cut as a major contributor to the diamond industry. In 2003, the Kejejian cousins won a prestigious GIA League of Honor award. The first Tycoon Cut diamond is on display in GIA's museum and a GIA classroom is named after the cut.